Please find the attachement. Over Ampere option is available in load disconnector to program for disconnecting load if ampere value exceed than programmed value.
Please follow the steps below to update the EB and DG KVA values to the meter: Open the Software: Launch the application where the KVA values have been updated. Select the Meter: Navigate to the list of meters and select the meter you wish to update. ...
Below are the resistance values for different installations Power Stations: 0.5 ohms, Extra High Tension (EHT) Stations: 1.0 ohms, 33 kV Substations: 2.0 ohms, Distribution Transformer (DTR) Structures: 5.0 ohms, Tower Foot Resistance: 10.0 ohms
Navigate to the "Network" or "Internet" settings. Look for the APN (Access Point Name) settings. For JIO, the APN should be set to jionet. Ensure the APN settings are correct: APN: jionet Authentication Type: None PDP Type: IPv4 If there's an option ...
Open a web browser and enter the router's IP address (typically 192.168.0.1 or 192.168.1.1). Enter your admin username and password. If you haven't changed these, they are usually admin for both fields.
1. Install the softkey License set up tool, which we received from the design team. 2. Open the configurator from the root folder and Note the serial number. (Each customer has a specific serial number).We have to share this serial number to our ...
The below error continuous comes in every second with pop-ups. Other Reports: Invalid index. (Exception from HRESULT: 0x8002000B (DISP_E_BADINDEX)) Other Reports: COM object that has been separated from its underlying RCW cannot be used. To stop ...