Article 4.22.1A : How to set CT primary in RPM meter?

• Related Articles

• Article 4.11.1.H : How to connect 3 Phase Amp meter and 3 Phase Kwh meter with common RYB CT?

  Yes, we can connect 3 Phase Amp meter and KWH meter with the same CT. not need of separate CT for both meters. The same RYB CT's may connect to both meters for measurement. Please do the connection of CT to meters as explain below. R phase CT S1 ...

• Article 2.0.8S : Selecting the mechanical dimension of the CT

  Selecting the mechanical dimension of the CT CTs are available in a number of different physical sizes. The inner diameter of the CT must be large enough to fit around the conductive wire you wish to monitor. The outer dimensions must be small enough ...

• Article 4.27.1B : CT Programming for Elmeasure Hanging CT's

  For 125A Hanging CT, please set CT Rating as 100/5 A in our meter. For 60A Hanging CT, please set CT Rating as 50/5 A in our meter.

• Article 2.0.23S : Why is the kW (Active Power) showing a negative reading on the meter?

  Consumption Load If users are metering a load that is consuming energy, seeing negative power (kW)  readings would cause errors when reading the total consumed energy on the meter. Negative readings can be a result of the following: CT reversal: If ...

• Article 4.11.1F : Programming range and Full scale display of ADC & VDC meter.

  Please find the below image of the backside of ADC & VDC. the input of ADC and VDC is shown in SR No sticker it should be selected by the customer as per requirement. Vin or I/P will be shown in Sr no sticker. Standard input and programming range is ...