Article 4.11.1.H : How to connect 3 Phase Amp meter and 3 Phase Kwh meter with common RYB CT?

• Related Articles

• Article 4.1.1.3 : Why in EN meter only one phase PF & KW value comes very less and KWh consumption is less with reference main meter?

  Please find the below images of the EN meter display to understand the situation of a meter. As shown in the above images we can see in the Y phase PF & KW is very less compare to the other two-phase. Here KW depends on the PF value because of PF ...

• Article 4.11.1G : 3 Phase ammeter selector switch connection with 1 Ph Amp meter (Alpha A).

  Please find the below image of 3 phase ammeter selector switch connection diagram with 1 phase Alpha A Amp meter. With the help of selector switch, we can measure Three-phase current in single-phase Ampere meter. Here L1, L2, L3 denotes RYB of 3 ...

• Article 4.2.12 : LG meter not gives accurate Kwh reading.

  If LG meter KWh reading consumption is not matched with actual consumption. Please check the following points as given. 1. First, check the CT connection ensure there is no loose connection. 2. Check the CT ratio set parameters with connected CT on ...

• Article 4.1.1.2 : Total KVA is less than the individual RYB per phase KVA summation in EN8400/EN8410.

  Please find the below image of EN meter FYR. In EN8400 has interchanged CT S1 and S2 in the B phase and minus value comes in the KW B phase. Also, neutral current An = 5.9 A  comes and as shown in image total KVA does not match the addition of ...

• Article 2.1A : Relation between Line Current and Phase Current.

  Line current is the current through any one line between a three-phase source and load. Phase current is the current through any one component comprising a three-phase source or load. Fig: 1 STAR connection Line & Phase relation. Fig: 2 DELTA ...