Article 2.0.8S : Selecting the mechanical dimension of the CT

• Related Articles

• Article 4.11.1.H : How to connect 3 Phase Amp meter and 3 Phase Kwh meter with common RYB CT?

  Yes, we can connect 3 Phase Amp meter and KWH meter with the same CT. not need of separate CT for both meters. The same RYB CT's may connect to both meters for measurement. Please do the connection of CT to meters as explain below. R phase CT S1 ...

• Article 4.22.1A : How to set CT primary in RPM meter?

  Kindly download the attached Video.

• Article 4.27.1A : Technical Specification for hanging CT 60 to 100A

  Kindly find the attachment.

• Article 4.27.1B : CT Programming for Elmeasure Hanging CT's

  For 125A Hanging CT, please set CT Rating as 100/5 A in our meter. For 60A Hanging CT, please set CT Rating as 50/5 A in our meter.

• Article 4.9.1E : Can I use any type of CT by simply changing the setting ?

  Yes, any CT can be used. (i.e - CT's which Elmeasure provides can be used directly. For 3rd party CT's, aerospace connector should be used & meter's board needs be calibrated accordingly (Calibration can be done only in service center)).