Article 4.5.1F : Whether MQTT gateway will work with Open Software

• Related Articles

• Article 4.5.1E : Whether GW 2000 MQTT Gateway will work with Third Party Software ?

  Yes our MQTT Gateway GW 2000 can be used for third party software. We can provide the data packet protocol so that other make software can be modified easily without much effort to decode the data and store it to their cloud/server. For this MQTT ...

• Article 3.1.1Q : What are the software needs to installed when I use GW2000?

  Once SQl is installed, Install the following softwares for GW2000 [MQTT gateway]. In Elnet CD Open MQTT setup folder & follow the below steps. Step 1 : Install ELNetV5.3 Setup Step 2 : Win32OpenSSL_Light-1_0_2h Step 3 : Install ...

• Article 4.5.1I : Will GW2000 work in 4G network?

  No. GW2000 (MQTT gateway) will work only in 2G network (i.e - It will work only in 2G data mode). *** End of article ***

• Article 4.5.1D : What are the Gateway Return Codes for GW2000 (MQTT) ?

  You can find this type of codes in Elnet MS log's. For example - "LOG-ts 2019-07-12 13:46:37.406: SITE-ID 003055127E68 || DEV-ID || GW-TS 2019-07-11 09:02:00 || LIVE-LOG-STS LOG || REC-STS ks ACK-STS 07" In this case, 07 is gateway return code; now ...

• Article 4.4.1D : How to reset gateway IP Address to default

  By default, Gateway's IP address is 192.168.5.175. This G/W IP can be changed according to customer's requirements (i.e network range). In some cases, if customer lose the new IP address; they can reset the G/W IP address to default. Please find the ...