Article 4.4.1D : How to reset gateway IP Address to default
By default, Gateway's IP address is 192.168.5.175. This G/W IP can be changed according to customer's requirements (i.e network range).
In some cases, if customer lose the new IP address; they can reset the G/W IP address to default.
Please find the below steps to reset the Gateway.
Step 1 : Open the 4 screws on the back of gateway.
Step 2 : Keep the Gateway ON and press the reset button for 10 seconds.
Step 3 : Gateway IP Address will be changed to default, i.e 192.168.5.175.
Thanks.
Related Articles
Article : How to find an IP address from a known mac address?
§ Enter the run command press "Windows + R" wrote "cmd" and then search with"arp -a"' in cmd. § Use the arp with additional arguments to find the IP within the same network segment. § With the command “arp -a” you can see the ARP table and its ...
Article 2.0.22S : Ping: Transmit failed. General failure.
Missing Default Gateway If the default gateway entry is missing, the message “General failure” could appear. This happens, when the computer tries to reach a host outside it´s own subnet. There is no route to the destination. To keep it simple: The ...
Article 4.19.2A : ATeS - Modbus register address
Modbus register address is attached.
Article 4.2.2A : LG+ Series (1119,1119L,1129,5110L,3100,5110,3399,5310) - Modbus register address.
Kindly download attached modbus register address.
Article 4.5.1D : What are the Gateway Return Codes for GW2000 (MQTT) ?
You can find this type of codes in Elnet MS log's. For example - "LOG-ts 2019-07-12 13:46:37.406: SITE-ID 003055127E68 || DEV-ID || GW-TS 2019-07-11 09:02:00 || LIVE-LOG-STS LOG || REC-STS ks ACK-STS 07" In this case, 07 is gateway return code; now ...