Article 4.5.1E : Whether GW 2000 MQTT Gateway will work with Third Party Software ?

• Related Articles

• Article 4.5.1F : Whether MQTT gateway will work with Open Software

  In MQTT we do not have option to check the communication in open software like the way we do it in our transparent gateway through modscan or modbus tool.  However we can check the communication status of the meters in MQTT gateway web page itself. ...

• Article 4.5.1D : What are the Gateway Return Codes for GW2000 (MQTT) ?

  You can find this type of codes in Elnet MS log's. For example - "LOG-ts 2019-07-12 13:46:37.406: SITE-ID 003055127E68 || DEV-ID || GW-TS 2019-07-11 09:02:00 || LIVE-LOG-STS LOG || REC-STS ks ACK-STS 07" In this case, 07 is gateway return code; now ...

• Article 4.5.1I : Will GW2000 work in 4G network?

  No. GW2000 (MQTT gateway) will work only in 2G network (i.e - It will work only in 2G data mode). *** End of article ***

• Article 2.0.1K : Can we integrate prepaid Meter with Third Party Software ?

  By using our software only prepaid system will work. Or else the same meters can be used as a postpaid meter if third-party software is used.    1. Third party software is very much dependent on network Healthiness, All prepaid logics are monitored ...

• Article 4.4.1D : How to reset gateway IP Address to default

  By default, Gateway's IP address is 192.168.5.175. This G/W IP can be changed according to customer's requirements (i.e network range). In some cases, if customer lose the new IP address; they can reset the G/W IP address to default. Please find the ...