Article 2.0.1N : Elmeasure Meter Query - DG sensing Voltage

• Related Articles

• Article 3.6.1AD: In SQL, how to clear all the rows in one query?

  If you want to delete all the rows in a table, use the below command. Click new query and type this command - truncate table "TableName". FYR - Kindly have a look at the attached image.

• Article 2.0.1Z : What are the protection standards in Elmeasure meters (MFM)?

  Elmeasure follows the Protection standard as per IEC 60529. IP 51 & IP 54 (Front option). IP51 Protected from limited dust ingress. Protected from condensation. IP54 Protected from limited dust ingress. Protected from water spray from any direction. ...

• Article 2.0.4D : What is the purpose of Power Assist?

  Power Assist can be installed between Meter & Gateway to avoid "240V AMF input". Existing method (before Power Assist) -  "240V AMF" input needs to be connected to the meter to detect the power as DG. New method (After Power Assist) - When power ...

• Article 6.1.18S : Moxa N-Port Converter Manual.

  Please find the attached PDF herewith.

• Article 2.0.23S : Why is the kW (Active Power) showing a negative reading on the meter?

  Consumption Load If users are metering a load that is consuming energy, seeing negative power (kW)  readings would cause errors when reading the total consumed energy on the meter. Negative readings can be a result of the following: CT reversal: If ...