Article 2.0.1Z : What are the protection standards in Elmeasure meters (MFM)?

• Related Articles

• Article 2.0.1R : IEC 60529 - IP (Protection standards)

  Ingress Protection (IP) and what it means, The IP Code (or International Protection Rating, sometimes also interpreted as Ingress Protection Rating*) consists of the letters IP followed by two digits and an optional letter. As defined in ...

• Article 4.2.4B : MFM Dual source

• Article 2.0.1H : Automatic reset in Elmeasure Meters ?

  There is no option to set the Energy meter reset at 1 MWh. There is no option to control the Energy readings. Our meters will reset as per the below method for both Auto Scaling and Counter Mode. 1. The Reset for any Elmeasure Meter will occur at ...

• Article 4.2.1.1S : Difference Between Watt meters and Energy meter.

  Comparison Chart Basis For Comparison Wattmeter Energy Meter Definition It measures the power flows in the circuit The energy meter measures the energy consume by the electrical load. Unit Measures power in watt. Measures energy in joules. Working ...

• Article 1.0.1D : DO's and DONT's for Elmeasure Products

  DO's 1.Always, install safety Equipment's like Earth leakage / overload & short circuit protection [circuit breakers / switches ] near point of supply. 2. Use lugs to connect the electrical wires to the meter while installing. ...