Article 4.33.1D : How many devices can be configured in each gateway?

• Related Articles

• Article 4.5.1D : What are the Gateway Return Codes for GW2000 (MQTT) ?

  You can find this type of codes in Elnet MS log's. For example - "LOG-ts 2019-07-12 13:46:37.406: SITE-ID 003055127E68 || DEV-ID || GW-TS 2019-07-11 09:02:00 || LIVE-LOG-STS LOG || REC-STS ks ACK-STS 07" In this case, 07 is gateway return code; now ...

• Article 4.4.1D : How to reset gateway IP Address to default

  By default, Gateway's IP address is 192.168.5.175. This G/W IP can be changed according to customer's requirements (i.e network range). In some cases, if customer lose the new IP address; they can reset the G/W IP address to default. Please find the ...

• Article 4.33.1C : What is the position of Antenna for LORA?

  Both (Meter & gateway) antenna should be placed in the same position. For example - If meter's antenna is vertical, gateway's antenna position should also be vertical. If meter's antenna is horizontal, gateway's antenna position should also be ...

• Article 4.33.1E : What is the log time interval for LORA?

  If 500 device is connected to a gateway - 4 hours will be the log time interval. If 1500 device is connected to a gateway - 12 hours will be the log time interval. *** End of document ***

• Article 2.0.1T : LoRA WAN communication queries

  Q1 : Max no of meters that can be connected on one LORAWAN gateway A1 : It depends on the frequency of data required. As thumb rule we can take for 30 minute data about 200 devices can be connected, provided it communicates only 10 parameters. Q2 : ...