Article 4.27.1A : Technical Specification for hanging CT 60 to 100A

• Related Articles

• Article 2.0.8S : Selecting the mechanical dimension of the CT

  Selecting the mechanical dimension of the CT CTs are available in a number of different physical sizes. The inner diameter of the CT must be large enough to fit around the conductive wire you wish to monitor. The outer dimensions must be small enough ...

• Article 4.27.1B : CT Programming for Elmeasure Hanging CT's

  For 125A Hanging CT, please set CT Rating as 100/5 A in our meter. For 60A Hanging CT, please set CT Rating as 50/5 A in our meter.

• Article 4.11.1.H : How to connect 3 Phase Amp meter and 3 Phase Kwh meter with common RYB CT?

  Yes, we can connect 3 Phase Amp meter and KWH meter with the same CT. not need of separate CT for both meters. The same RYB CT's may connect to both meters for measurement. Please do the connection of CT to meters as explain below. R phase CT S1 ...

• Article 4.22.1A : How to set CT primary in RPM meter?

  Kindly download the attached Video.

• Article 4.1.1S : Whether we can support inbuilt CT in eNavigator construction ?

  We cannot support with inbuilt CT in EN series, but we can support with hanging CT.