Article 2.0.2P : Is Analog Input & Analog output is possible in one meter?

• Related Articles

• Article 4.11.1D : Connection diagram : Analog Output

  Kindly find the attached file.

• Article 4.17.2F EPC Meter Digital Input and Analog Input Supply.

     Meter Digital Input and Analog Input Supply 1)      Optional: Digital Input (5-24V), Analog input (4–20 mA / 0–20 mA). 2)      Digital Input programmable for high frequency (72000 RPM) or low frequency (6 RPM).  3)      ON and OFF time for ...

• Article 4.17.2 K: While EPC Meter 1st analog is displaying correct value and 2nd Analog value is incorrect in Modscan/Modbus poll.

  While verifying the both inputs on Modscan/Modbus poll its displaying: The reading of one of the analog input is displaying the correct value while for other analog input its displaying greater than the actual. However, while connecting a single ...

• Article 4.2.1H : In LG+ series, 2 Analog inputs is possible ?

  At present Analog Input is not possible in LG+ series.

• Article 4.11.1F : Programming range and Full scale display of ADC & VDC meter.

  Please find the below image of the backside of ADC & VDC. the input of ADC and VDC is shown in SR No sticker it should be selected by the customer as per requirement. Vin or I/P will be shown in Sr no sticker. Standard input and programming range is ...