ElMeasure | 4.17.2 General Queries

4.17.2 General Queries
Article 4.17.2 M: If EPC meter is not allowing writing the frequency parameter then what should be replaced? Main Unit or DI/AI Module
In such condition replace priorly Main unit as DI/AI module has feasibility to work with any main unit.
Article 4.17.2 K: While EPC Meter 1st analog is displaying correct value and 2nd Analog value is incorrect in Modscan/Modbus poll.
While verifying the both inputs on Modscan/Modbus poll its displaying: The reading of one of the analog input is displaying the correct value while for other analog input its displaying greater than the actual. However, while connecting a single ...
Article 4.17.2 J EPC meter Analog Input Parameter setup in Elnet configurator.
Please Refer to Image.
Article 4.17.2 I Which model should be selected for EPC Meter in Elnet configurator software?
EPC Meter Model Configuration is required in SQL, please refer to attachment for more details.
Article 4.17.2H EPC Meter Hardware Details.
Refer to Attachment.
Article 4.17.2G How to Check EPC Meter DI Status on Meter Display?
1) Press Down Key untill D1, D2, D3, D4, D5 & D6 are not displayed on screen. 2) It will display the status of DI -> ON/OFF (Refer the Image)
Article 4.17.2F EPC Meter Digital Input and Analog Input Supply.
Meter Digital Input and Analog Input Supply 1) Optional: Digital Input (5-24V), Analog input (4–20 mA / 0–20 mA). 2) Digital Input programmable for high frequency (72000 RPM) or low frequency (6 RPM). 3) ON and OFF time for ...
Article 4.17.2E How to Check EPC Meter AI Status (Modbus Address) in MODSCAN?
MODBUS Address: From 40273; Length 4 For AI 1 - 40273 & 40274 AI 2 – 40275 & 40276 Data Type: Float(LS) It will show the Float Value.
Article 4.17.2D How to Check EPC Meter DI Status (Modbus Address) in MODSCAN?
MODBUS Address: From 40634; Length 16 For DI 1 = 40634 & 40635 DI 2- 40636 & 40637 DI 3- 40638 & 40639 DI 4- 40640 & 40641 DI 5- 40642 & 40643 DI 6- 40644 & 40645 Data Type: Integer It will show the 0 or 1.
Article 4.17.2C : EPC Meter AI Configuration
Analog Input Configuration In EPC 5110 D. --> Go to EPC Meter Setup Mode. A) Change the Parameter dsbl.A.1 (Analog Input 1 parameter) Options: Disable / 0.to.20mA/4.to.20mA B) Change the Parameter 1000.A.1 Range: 0.001 to 999 Mega (According to ...
Article 4.17.2B : EPC Meter AI Connection Diagram
AI Connection Diagram AI Connections

ElMeasure | 4.17.2 General Queries | Knowledge Base

4.17.2 General Queries

Article 4.17.2 M: If EPC meter is not allowing writing the frequency parameter then what should be replaced? Main Unit or DI/AI Module

Article 4.17.2 K: While EPC Meter 1st analog is displaying correct value and 2nd Analog value is incorrect in Modscan/Modbus poll.

Article 4.17.2 J EPC meter Analog Input Parameter setup in Elnet configurator.

Article 4.17.2 I Which model should be selected for EPC Meter in Elnet configurator software?

Article 4.17.2H EPC Meter Hardware Details.

Article 4.17.2G How to Check EPC Meter DI Status on Meter Display?

Article 4.17.2F EPC Meter Digital Input and Analog Input Supply.

Article 4.17.2E How to Check EPC Meter AI Status (Modbus Address) in MODSCAN?

Article 4.17.2D How to Check EPC Meter DI Status (Modbus Address) in MODSCAN?

Article 4.17.2C : EPC Meter AI Configuration

Article 4.17.2B : EPC Meter AI Connection Diagram