Article 2.0.2C : Why neutral current is high in some meters?

This situation will occur due to unbalanced PF and harmonics,

For idle calculation, let us assume the current is 50A and all phases operate at 0.5Lg.

So the calculation will be (50 * cos 60) + (50 * cos 180) + (50 * cos 300) = 25 - 50 + 25 = 0.

We can calculate by same method.

Related Articles
Article 4.1.1.1 : Why Neutral current An value comes in EN8410 & EN8400 if there is no current in neutral?
What is the neutral current in a 3 phase system? The neutral current in a three-phase, four-wire wye system represents the imbalance of the three-phase conductors, also known as the "hot" conductors. If the three hot conductors are equal, as in the ...
Article 2.1A : Relation between Line Current and Phase Current.
Line current is the current through any one line between a three-phase source and load. Phase current is the current through any one component comprising a three-phase source or load. Fig: 1 STAR connection Line & Phase relation. Fig: 2 DELTA ...
Article 4.3.1D : Meters Not recharging
1. Check meter is communicating with server. 2. In ELNet Customer Master verify for serial number is matching with connected meter serial no 3. Verify weather 2 meters are configured for same serial number
Article 3.1.1AB : How do I know whether meters are communicating or not in Elnet v5.3?
In PC, you can find a small round Elnet icon in taskbar. If the icon blinks then we can conclude that meters are communicating to the software. If the icon is stable, it means the meters are not communicating. *** End of article ***
Article 3.1.2L : Why meters are showing red icon in Online >Diagnostic page ?
It means meters communicating with Elnet software but meters are not configured properly. So read/write meters and set all setting with save option.

Related Articles