Article 2.0.3T : When does energy reading will reset automatically ?

• Related Articles

• Article 4.4.1D : How to reset gateway IP Address to default

  By default, Gateway's IP address is 192.168.5.175. This G/W IP can be changed according to customer's requirements (i.e network range). In some cases, if customer lose the new IP address; they can reset the G/W IP address to default. Please find the ...

• Article 4.3.1K : Why the balance is reducing when prepaid meter automatically reset?

  When KVA value reaches maximum value, meter will automatically reset to 0. When the meter resets, balance is also reducing which should not happen. In such case, firmware needs to be updated (to version 3.09) in that prepaid meter. Note: This is ...

• Article 2.0.1H : Automatic reset in Elmeasure Meters ?

  There is no option to set the Energy meter reset at 1 MWh. There is no option to control the Energy readings. Our meters will reset as per the below method for both Auto Scaling and Counter Mode. 1. The Reset for any Elmeasure Meter will occur at ...

• Article 2.0.1F : How to reset energy value via modbus ?

  Register 40159 will holds the Wh value. Please refer the modbus register mapping details. Resetting Energy Values through Modbus register is not possible.

• Article 4.1.1E : EN Meter kWH reset Reading.

  1. The Reset for EN Meter will occur at (999999 kvAH * MF ) 2. MF is taken into consideration from kW calculation 3. kW calculation = (1.732*PT pri *CT pri)/1000 PT pri, CT pri at Full scale. Same MF to be selected for both RESOLUTION & COUNTER ...