This situation will occur due to unbalanced PF and harmonics, For idle calculation, let us assume the current is 50A and all phases operate at 0.5Lg. So the calculation will be (50 * cos 60) + (50 * cos 180) + (50 * cos 300) = 25 - 50 + 25 = 0. We ...
Elmeasure follows the Protection standard as per IEC 60529. IP 51 & IP 54 (Front option). IP51 Protected from limited dust ingress. Protected from condensation. IP54 Protected from limited dust ingress. Protected from water spray from any direction. ...
Line current is the current through any one line between a three-phase source and load. Phase current is the current through any one component comprising a three-phase source or load. Fig: 1 STAR connection Line & Phase relation. Fig: 2 DELTA ...
There is no option to set the Energy meter reset at 1 MWh. There is no option to control the Energy readings. Our meters will reset as per the below method for both Auto Scaling and Counter Mode. 1. The Reset for any Elmeasure Meter will occur at ...
What is the neutral current in a 3 phase system? The neutral current in a three-phase, four-wire wye system represents the imbalance of the three-phase conductors, also known as the "hot" conductors. If the three hot conductors are equal, as in the ...