Article 2.0.3I : What is the Data Log Interval range programmable in EN/PN series?

• Related Articles

• Article 3.5.1A : EN/PN - Data Logger - Version 4 - Software

  For EN/PN above version 04.07, this updated software should be used to download the data. Click this link for software download page, http://www.elmeasure.com/resources/software

• Article 4.33.1E : What is the log time interval for LORA?

  If 500 device is connected to a gateway - 4 hours will be the log time interval. If 1500 device is connected to a gateway - 12 hours will be the log time interval. *** End of document ***

• Article 3.1.1.0: how to set datalog time interval in ElNet ver 5.3?

  We can set or change the Datalog time interval through ElNet Configurator. Go to ElNet > Configurator > Tools > Backup / Others > Datalog Interval Time. After setting the data log interval time restart the ElNet service. Please find the below image ...

• Article 4.1.1.24S: PF value not show accurate in EN meters compare to reference meter.

  Solution: PF value depends on current and voltage phase angle. First, check the voltage Phase angle in the meter it should be 0, 120, 240.  and verify the CT and PT connection in meter accordingly RYB. An issue on the site: PF value does not change ...

• Article 4.1.1B : No of days calculation for 1 MB Data Log EN 8400

  No. of Record - 1 MB Parameters Data Log Interval 15 MIN 30 MIN 45 MIN 60 MIN  NO OF DAYS 121920 1 1270 2540 4064 5080 81280 2 846 1693 2709 3386 48768 4 508 1016 1625 2032 24384 9 254 508 812 1016 16256 14 169 338 541 677 8128 29 84 169 270 338