Please find the attached image of error in a relay below. This error generated due to improper CT connection is done. If 3CT connected first to make sure every CT S1 & S2 are connected accordingly. If an error did not resolve then check CT connection ...
Line current is the current through any one line between a three-phase source and load. Phase current is the current through any one component comprising a three-phase source or load. Fig: 1 STAR connection Line & Phase relation. Fig: 2 DELTA ...
What is the neutral current in a 3 phase system? The neutral current in a three-phase, four-wire wye system represents the imbalance of the three-phase conductors, also known as the "hot" conductors. If the three hot conductors are equal, as in the ...
Consumption Load If users are metering a load that is consuming energy, seeing negative power (kW) readings would cause errors when reading the total consumed energy on the meter. Negative readings can be a result of the following: CT reversal: If ...