Related Articles
Log in to the TP-Link Router Admin Page
Open a web browser and enter the router's IP address (typically 192.168.0.1 or 192.168.1.1). Enter your admin username and password. If you haven't changed these, they are usually admin for both fields.
Check Connection Mode
Ensure the connection mode is set to "Auto" or "LTE Only" depending on your router's configuration options.
Article 4.4.1B : How to Connect Modbus Poll S/W with GW1000.
1. Open GW1000 Default Home page using its IP. 2. Enter default User name(admin) & Password(12345). After successfully login, You will get GW Home Page. 3. Go to Misc. Setting & Change protocol from MODBUS_RTU to MODBUS_TCP/IP. Now click Update. 4. ...
Article 3.1.2E : Elnet v5.3 - Installation / Uninstallation - "Error code 2503"
Follow the below steps to overcome the issue. Solution : 1. C:\windows\Installer Check the Installer files 2. Clear Temp Directory files ( ie : C:\windows\temp ) . 3. Run below commands 1 - msiexec /unreg 2 - msiexec /regserver 4. ...
Verify the Internet connection
After the router restarts, check if the internet is now working over IPv4. You can verify this by checking the IP address on your connected device: Open a browser and go to a site like ipinfo.io or whatismyip.com to see if your IP address is IPv4.