By default, Gateway's IP address is 192.168.5.175. This G/W IP can be changed according to customer's requirements (i.e network range). In some cases, if customer lose the new IP address; they can reset the G/W IP address to default. Please find the ...
How to make 'Low balance blink 0' in Modbus Poll? 1) In Modbus Poll Click on 'Setup' 2) Click on 'Read/Write Definition' 3) Enter the Address value as '6961' Quantity '2' (In general Slave ID should be entered with the particular ...
There is no option to set the Energy meter reset at 1 MWh. There is no option to control the Energy readings. Our meters will reset as per the below method for both Auto Scaling and Counter Mode. 1. The Reset for any Elmeasure Meter will occur at ...