Article 2.0.2Y : What are all the parameters will come under basic group?

• Related Articles

• Article 2.0.2U : What are all the parameters will come under Power group?

  Active power (watts), Apparent power (VA), Reactive Power (VAR) Power factor.

• Article 3.1.1L : What are all the parameters will display in MIN & MAX reports ?

  BASIC ( VLL, VLN, A, F) & POWER( W, VA, VAR, PF) parameters.

• Article 4.1.1A : Zero is displaying in THD Y PHASE ?

  IF meter is connected with 3 CT and 3 phase and meter is programmed for DELTA then  A THD in Y PHASE Zero is displayed. How to over come A. Remove CT connected in Y phase  B. Let all the CT be connected set STAR in setup.

• Article 4.2.1C : What parameters can be seen in LG+1129 through RS485.

  Our LG+ 1129 meter have an option to select parameter 1 and parameter 2 in programming page. Whatever parameter you select in parameter 1 and parameter 2, the same will be displayed in meter and the same data you will get through Modbus registers. ...

• Article 4.11.1F : Programming range and Full scale display of ADC & VDC meter.

  Please find the below image of the backside of ADC & VDC. the input of ADC and VDC is shown in SR No sticker it should be selected by the customer as per requirement. Vin or I/P will be shown in Sr no sticker. Standard input and programming range is ...