Article 4.2.1R : What are the parameters available in LG+1119?

• Related Articles

• Article 4.2.3F : Programming guide : [Revised] LG 1119D | LG 1129D| LG 3120D | LG 5110D | LG 5120D.

  Kindly find the attached document.

• Article 4.2.12 : LG meter not gives accurate Kwh reading.

  If LG meter KWh reading consumption is not matched with actual consumption. Please check the following points as given. 1. First, check the CT connection ensure there is no loose connection. 2. Check the CT ratio set parameters with connected CT on ...

• Article 4.2.4 Catalog and Modbus Register for LG6435E

  Please find the attached 

• Article 4.2.1U : What are the parameters available in LG+3399 ?

  Two Programmable parameters P1 & P2 in set up mode. P1/P2 (Parameter 1/Parameter 2) – Basic (VLL,VLN,A,F) /Watts/PF/VA Programmed. Parameters (Average & phase wise) along with Wh, Wh (OLD), On.Hrs, Parity & Device ID.

• Article 4.2.1C : What parameters can be seen in LG+1129 through RS485.

  Our LG+ 1129 meter have an option to select parameter 1 and parameter 2 in programming page. Whatever parameter you select in parameter 1 and parameter 2, the same will be displayed in meter and the same data you will get through Modbus registers. ...