Article 4.25.1A : Is OM1310 has PF?

Yes, it has; but there is no LED indication for PF.

One of our customer is confused whether it has PF or not as there is no indication for PF in meter.

So, here is the Video (with / without load) for reference.

• Related Articles

• Article 4.1.1.24S: PF value not show accurate in EN meters compare to reference meter.

  Solution: PF value depends on current and voltage phase angle. First, check the voltage Phase angle in the meter it should be 0, 120, 240.  and verify the CT and PT connection in meter accordingly RYB. An issue on the site: PF value does not change ...

• Article 4.1.1.3 : Why in EN meter only one phase PF & KW value comes very less and KWh consumption is less with reference main meter?

  Please find the below images of the EN meter display to understand the situation of a meter. As shown in the above images we can see in the Y phase PF & KW is very less compare to the other two-phase. Here KW depends on the PF value because of PF ...

• Article 2.0.3V : When will Avg PF will be displayed in meter?

  If meter has Kvah parameter Ave.PF will be displayed.

• Article 4.11.3E : What are the models available in omega series?

  OM 1300 & OM 1310.

• Article 4.25.2A : OM1300 User manual.

  Kindly find the attached document. *** End of article ***