Article 4.1.1N : In EN series at what level Harmonics can be measured?

• Related Articles

• Article 4.1.1.24S: PF value not show accurate in EN meters compare to reference meter.

  Solution: PF value depends on current and voltage phase angle. First, check the voltage Phase angle in the meter it should be 0, 120, 240.  and verify the CT and PT connection in meter accordingly RYB. An issue on the site: PF value does not change ...

• Article 4.1.1.3 : Why in EN meter only one phase PF & KW value comes very less and KWh consumption is less with reference main meter?

  Please find the below images of the EN meter display to understand the situation of a meter. As shown in the above images we can see in the Y phase PF & KW is very less compare to the other two-phase. Here KW depends on the PF value because of PF ...

• Article 2.0.2D : How Arithmetic, vector & vector harmonics are calculated?

  Here it is..

• Article 3.5.1A : EN/PN - Data Logger - Version 4 - Software

  For EN/PN above version 04.07, this updated software should be used to download the data. Click this link for software download page, http://www.elmeasure.com/resources/software

• Article 6.1.18S : Moxa N-Port Converter Manual.

  Please find the attached PDF herewith.