Article 4.5.2A : GW2000 - Datasheet

• Related Articles

• Article 4.21.1C : GW2050 - Quick start guide

  Kindly find the attached document.

• Article 4.5.1D : What are the Gateway Return Codes for GW2000 (MQTT) ?

  You can find this type of codes in Elnet MS log's. For example - "LOG-ts 2019-07-12 13:46:37.406: SITE-ID 003055127E68 || DEV-ID || GW-TS 2019-07-11 09:02:00 || LIVE-LOG-STS LOG || REC-STS ks ACK-STS 07" In this case, 07 is gateway return code; now ...

• Article 3.2.4A : Typical schematic for EB-DG changeover through POWER ASSIST.

  Kindly download the attached schematic diagram.

• MQTT Gateway GW 2000 configuration.

  Elmeasure GW2000 MQTT gateway configuration. 1.Power ON the Gateway Use proper 5V DC power supply for stable operation. Connect Ethernet cable if using LAN mode. 2.Connect RS485 Network Connect all meters in RS485 chain. Check A(+) and B(-) polarity ...

• Article 4.9.2B : ID Logger 8000 - Datasheet.

  Kindly find the attached datasheet for ID Log 8000. *** End of article ***