Article 6.1.20S : What is a default password for Moxa NPort?

The default password for NPort is: moxa

If the firmware version of your NPort is lower than specified in a table, then there is no password for NPort Just press Submit in a web interface.

​

• Related Articles

• Article 6.1.19S : How to reset an Moxa NPort password?

  To reset a password and to recover NPort default settings, press Reset button and hold it for 5 seconds. There is no other way to restore the forgotten password of NPort.

• Article 6.1.18S : Moxa N-Port Converter Manual.

  Please find the attached PDF herewith.

• Article 4.4.1B : How to Connect Modbus Poll S/W with GW1000.

  1. Open GW1000 Default Home page using its IP. 2. Enter default User name(admin) & Password(12345). After successfully login, You will get GW Home Page. 3. Go to Misc. Setting & Change protocol from MODBUS_RTU to MODBUS_TCP/IP. Now click Update. 4. ...

• Article 3.6.1W : How to solve Incorrect syntax near 's' when restoring DB.

  When restoring DB, Incorrect syntax near 's' error will popup. To solve this, follow the below steps. Step 1 : Go to DB restore page (Select DB -> right click -> select Tasks -> Restore -> Database). Step 2 : Click options. Step 3 : Enable overwrite ...

• Article 2.0.2O : In Elmeasure Demand controller how many relay output is possible by default?

  By default 4 relay output is available.