By default, Gateway's IP address is 192.168.5.175. This G/W IP can be changed according to customer's requirements (i.e network range). In some cases, if customer lose the new IP address; they can reset the G/W IP address to default. Please find the ...
You can find this type of codes in Elnet MS log's. For example - "LOG-ts 2019-07-12 13:46:37.406: SITE-ID 003055127E68 || DEV-ID || GW-TS 2019-07-11 09:02:00 || LIVE-LOG-STS LOG || REC-STS ks ACK-STS 07" In this case, 07 is gateway return code; now ...
In most cases, a "Request Timed Out" message is caused by a firewall blocking the connectivity. Before you can ping, you'll need to ensure that the target machine has a green status indicator. If this is not the case, search our knowledge base for ...
Missing Default Gateway If the default gateway entry is missing, the message “General failure” could appear. This happens, when the computer tries to reach a host outside it´s own subnet. There is no route to the destination. To keep it simple: The ...
Once SQl is installed, Install the following softwares for GW2000 [MQTT gateway]. In Elnet CD Open MQTT setup folder & follow the below steps. Step 1 : Install ELNetV5.3 Setup Step 2 : Win32OpenSSL_Light-1_0_2h Step 3 : Install ...