When KVA value reaches maximum value, meter will automatically reset to 0. When the meter resets, balance is also reducing which should not happen. In such case, firmware needs to be updated (to version 3.09) in that prepaid meter. Note: This is ...
Answer is No. We can only view how much balance left & not how many units left. For example - 1. one unit (1 kWH) tariff is 10/- 2. we recharge for Rs 100. then 10 units can be utilized. 3. in Meter we can view 100/- & decreasing balance as per kWH ...
Consumption Load If users are metering a load that is consuming energy, seeing negative power (kW) readings would cause errors when reading the total consumed energy on the meter. Negative readings can be a result of the following: CT reversal: If ...