Please find the below images of the EN meter display to understand the situation of a meter. As shown in the above images we can see in the Y phase PF & KW is very less compare to the other two-phase. Here KW depends on the PF value because of PF ...
Yes, we can connect 3 Phase Amp meter and KWH meter with the same CT. not need of separate CT for both meters. The same RYB CT's may connect to both meters for measurement. Please do the connection of CT to meters as explain below. R phase CT S1 ...
If LG meter KWh reading consumption is not matched with actual consumption. Please check the following points as given. 1. First, check the CT connection ensure there is no loose connection. 2. Check the CT ratio set parameters with connected CT on ...
LG 6400DMC not showing the instant demand value Step-1:- Check the CT connection in the meter in Watts Parameter Like the image shown below STEP-2:- If the CT Get reversed means meter will shows minus in the watts parameter. If CT is get reversed ...